Garage · 2013 to 2026

Garage Log: Cars and Small Engines

I dabble in DIY automotive and small-engine repair. This is the running log, newest first, including the one that beat me.

A red brake caliper and rotor in front of a yellow coilover, with the wheel off and the car on jack stands.
Coilovers and brakes on a MINI, 2013.

Why

Some of these were repairs, and some were just taking things apart to learn how they work.

Constraints

  • Driveway and garage: most of this was done at home with jack stands and hand tools, or in a friend's garage.
  • Learning as I go: plenty of these were firsts.

The log

Summer 2026: Club Car golf cart

I took the wiring apart just to understand how the cart works. Later, after a summer of use, it started acting like it ran out of fuel about 3 miles into a drive. I replaced the pulse fuel pump.

Wiring and spade connectors inside a golf cart's body panel.
Learning the wiring.

June 2026: Dad's Harley that wouldn't run

My dad replaced the coil pack and plug wires on his Harley, and afterward it wouldn't run. I tracked it down to a vacuum line that wasn't connected to the petcock valve. With no vacuum, the petcock never opened to let fuel through. Reconnecting the line was the fix.

The V-twin engine and chrome exhaust of a Harley-Davidson motorcycle.
The Harley.

May 2025: Hoverboard (it won)

I opened up a hoverboard to fix it and got as far as the control board. I didn't get it working.

A hoverboard's green control board with wiring, exposed inside the open shell.
As far as I got.

August 2024: Generator fuel leak

A Coleman Powermate generator was leaking fuel around the carburetor. I made a replacement gasket out of a cereal box, cut to shape. No leaks since.

A Coleman Powermate Pulse 1800EX generator with a Subaru engine.
Running on a cereal box gasket.

June 2024: Wheel hub

I replaced a wheel hub bearing on a car.

A wheel hub bearing assembly with its sensor wire, resting on a brake rotor.
The hub assembly.

April 2024: A brake job, taught

I walked one of my kids through a brake job.

December 2021: Misfire diagnosis

An engine misfire traced back to a bad ignition coil. I pulled the coils, checked the plug wells, and replaced the bad coil.

Close-up of an engine head with a coil removed, showing the spark plug well and the coil's wiring connector.
Coil out, plug well exposed.

Summer 2020: Jeep engine failure

The Jeep's engine failed completely. I tore the front of the engine down to the timing gears for head, rocker, and cam work.

A Jeep engine bay with the front of the engine torn down, timing components exposed.
Torn down.
Close-up of the engine's timing gears and chain with the timing cover off.
Down to the timing gears.

October 2018: ATV carburetor rebuild

I rebuilt the carburetor on an ATV: took it apart, cleaned it, and put it back together.

An ATV carburetor body taken apart on a red cloth.
Apart.
The reassembled ATV carburetor on a towel.
Back together.

2014: Helping a friend with an engine swap

I helped a friend swap the engine in their car and do exhaust work, in their garage.

An engine hanging from a chain hoist in a garage, with lifts behind it.
Engine out.

April 2013: MINI coilovers, brakes, and exhaust

Coilovers, brakes, and exhaust on a blue MINI.

A yellow coilover and a red brake caliper on a MINI, with the wheel off.
Coilover and brakes.
A twin-outlet exhaust under the rear of a blue MINI on jack stands.
The exhaust.

How I checked it

  • Generator: no fuel leaks since the cardboard gasket went in.
  • Harley: it ran once the vacuum line was back on the petcock.
  • Golf cart: the new fuel pump just went in. A long drive past the 3-mile mark is the real test.

What broke

The hoverboard. Not every repair works, and that one stays on the list.