Home lab · 2020 to November 2026
Home Lab: Shelf to Rack
My home lab started on a wooden shelf in the basement. Six years later it's an enclosed wall rack that runs the services my other projects depend on.
The problem
The 2020 setup worked, but it didn't scale. Consumer mesh Wi-Fi wasn't keeping up, the gear was stacked on a shelf with cables everywhere, a power blip could take everything down, and every new service needed somewhere to run.
Constraints
- Home, not a data center: it lives in the basement, so it has to be enclosed and tidy.
- Grow over time: the lab was upgraded piece by piece over several years, not rebuilt all at once.
What it is now
Hardware
- Enclosed wall-mount rack to keep everything in one place.
- UniFi networking, with a UniFi access point on top of the rack, replacing the consumer mesh Wi-Fi.
- A used Cisco Catalyst PoE switch.
- Synology NAS for storage and services.
- CyberPower rack UPS, so a power blip doesn't take the lab down.
What runs on it
- Home Assistant, including the WLED roofline lights.
- Paperless-ngx on the Synology, for the document archive.
- Pi-hole for network-wide DNS and ad blocking.
- Plex for media.
- File storage and backups on the NAS.
How I checked it
I haven't run a formal test of the whole lab yet. Next on my list: pull the power and time how long the UPS keeps everything up, then check that every service comes back on its own when power returns.
What I'd change
The cabling inside the rack works but isn't pretty, and the next cleanup is shorter patch cables and labels.